How to use 10.0.0.2 IP Address to login into Telkom, D-Link Router?
10.0.0.2 is a private IP address used by router brands such as Siemens, Micronet, Telecom and D-link routers. Business routers inside a private network are configured with a subnet starting from 10.0.0.2 IP address for all the local gateway addresses that have 10.0.0.1 as their default IP.
10.0.0.2 IP acts more like a subset of the main IP and such an IP is used for sharing information inside a network. This enables a network to avoid any IP conflicts and maintains efficiency in a network.
All the private IPV4 addresses starting from 10.0.0.0 were reserved for private networks where private means they were not supposed to be used for an internet host or web server. In most cases, corporate networks have a default IP on 10.0.0.0 network followed by many subnets(a subdivision of an IP network) with client IPs such as 10.0.0.1 and 10.0.0.2.
What is 10.0.0.2 Router Login Used for?
IP QoS: Allows you to set bandwidth for computers to avoid heavy load.
DNS and Proxy Settings: DNS refers to the system that converts a domain name in the machine-readable address, while proxy means the medium for connection between two endpoint devices.
WPS: known as wifi protection system. It is a standard that helps make wireless communication faster, secure and more efficient.
MAC Address: Provides unique addresses among the hardware devices connected to each other in a network.
LAN, WAN & WLAN settings: Lets you configure different types of area-based networks. You can use 10.0.0.2 DNS for setting the security settings.
DHCP: Dynamic host configuration protocol allows the server to automatically assign a different address in a sequential manner.
PPPoE: Called as Point-to-Point over Ethernet, it is a protocol used to establish DSL connection to the internet.
How to Access 10.0.0.2 Admin Login Page?
To access the network settings,
Open browser on your system and type 10.0.0.2 in the address bar and press enter.
You will get the https://10.0.0.2 login page
Upon successful login, you will find router network settings
There is also a possibility that you may not be asked to enter any details as is the case with some brands. You may be redirected directly to the configuration settings page.